Mechanic RS180MAX Liquid Camera Cleaner

Mechanic RS180MAX Liquid Camera Cleaner

The Mechanic RS180MAX Liquid Camera Cleaner is

a specialized solution primarily used by professional electronics repair technicians to remove stubborn watermarks and black spots from the inside of smartphone camera modules without needing to disassemble the camera itself. This is distinct from standard lens cleaners, which are for external use. 

Key features

• Non-invasive cleaning: The formula is designed to be used with an ultrasonic cleaner to target imperfections inside the sealed camera module. This avoids the need for complex and risky disassembly and soldering, which could damage the delicate components.

• Ultrasonic application: For best results, the

  RS180MAX

  is used with an ultrasonic cleaner. The technician immerses the camera module in the liquid and uses the machine's high-frequency vibrations to clean the interior of the module.

• Targeted repairs: The cleaner is specifically formulated to remove internal water damage and black spots that blur images or create permanent imperfections. It is compatible with both Apple and Android phone camera modules.

• Safe and rapid: It is a thin, rapidly evaporating solvent that is safe for camera components, including the blue light lens and anti-shake glue. The process is designed to be quick, with the cleaning phase lasting only a few seconds to a minute.

• Professional use: The product is primarily sold as an industrial or professional tool for technicians who specialize in phone and electronic repairs. It comes in large 500ml or 1000ml bottles. 

How it is used by technicians

1. Remove the camera module: The technician first carefully removes the camera module from the device.

2. Prepare the ultrasonic bath: The RS180MAX fluid is poured into an ultrasonic cleaner.

3. Clean the module: The camera module is placed into the ultrasonic cleaner for a brief period, typically 7–15 seconds, depending on the severity of the damage.

4. Dry and reinstall: After cleaning, the module is removed and air-dried for a few minutes before being reinstalled and tested.